Moisture is especially preferred in the places where wood is preferred in the industry. The difference from Auto Painting Cabinets is to allow the paint particles to adhere to the water. Since wood is a material that can work, water prevents the deformation of the wood by satisfying the desired moisture. In these cabinets, it is possible to perform drying process after both painting and painting. This eliminates the need for a drying cabinet.
Intended use of the wood to prevent the operation of the dyeing process in a clean and dust-free environment, without harming the health of the human body without any problems, without harming the environment, painting and drying process is completed.
Wet paint, color of the dye according to the package insertion time 20 ° -24 ° C temperature is requested, the drying time 40 ° -80 ° C temperature is required.
These cabins work in the relevant ministries by filtering the clean air from the inside of the cabin to the solvent outlet, filtering the dye particles.
The painting cabinet takes the air from the external environment and delivers it through the EU4 filter to the heat exchanger unit. The heat exchanger also supplies the heated air in the cabin from the EU5 ceiling filter in the air chest section inside the cabin. Through the air supplied from above, the paint is adhered to the water below the cabin. From here, the cabin moves to the separator behind the screen. The leaking paint from the separator is transported to the bag filters in the exhaust unit. In other words, in these cabins, there will be solvent gas, not the paint particle that will be exited from the exhaust chimney.
Nowadays, when filtered air is discharged as odor, it has started to eliminate the solvent gas by bringing the disposal technology.
The goal is to achieve the dyeing process without harming the nature and human.
In these cabinets, all units, ie the exhaust unit, the heating-ventilation unit, the separator-nozzle group, the water curtain and the circulation pump are operating, only the heating unit operates at the time of drying and the system automatically stops when the desired drying time is completed.
These cabins are mostly used in the furniture industry and are preferred in the plastics and metal industry. The water curtain section in the plastic and metal sector can also be designed to be on the lower deck.
The reason why these cabinets are most preferred is that they can be dried without using the material at the time of dyeing and then the material is packaged. Of course, in the form of facilities for materials requiring daily capacity in the form of various industrial or tunnel type facilities can be produced in a series of processes.
In order to maintain healthy working conditions in water curtain wet paint booths, it is necessary to follow periodic general maintenance, filter changes and chemical intervened water change times as in other cabinets. This situation is very important for nature, people and the trouble-free material.